• Tistory
    • 태그
    • 위치로그
    • 방명록
    • 관리자
    • 글쓰기
Carousel 01
Carousel 02
Previous Next

[ROS] Rosbag2Video

Programming/기타 etc. 2021. 11. 30. 16:42




ROS 에서 녹화된 rosbag 파일 내의 비디오를 추출하는 코드

github에 쓰기 편하게 만들어 준 코드가 있어서 기록.

 

https://github.com/mlaiacker/rosbag2video

 

GitHub - mlaiacker/rosbag2video: converts image sequence in ros bag files to video files

converts image sequence in ros bag files to video files - GitHub - mlaiacker/rosbag2video: converts image sequence in ros bag files to video files

github.com

 

#!/usr/bin/env python3

"""
rosbag2video.py
rosbag to video file conversion tool
by Abel Gabor 2019
baquatelle@gmail.com
requirements:
sudo apt install python3-roslib python3-sensor-msgs python3-opencv ffmpeg
based on the tool by Maximilian Laiacker 2016
post@mlaiacker.de"""

import roslib
#roslib.load_manifest('rosbag')
import rospy
import rosbag
import sys, getopt
import os
from sensor_msgs.msg import CompressedImage
from sensor_msgs.msg import Image
import cv2

import numpy as np

import shlex, subprocess

MJPEG_VIDEO = 1
RAWIMAGE_VIDEO = 2
VIDEO_CONVERTER_TO_USE = "ffmpeg" # or you may want to use "avconv"

def print_help():
    print('rosbag2video.py [--fps 25] [--rate 1] [-o outputfile] [-v] [-s] [-t topic] bagfile1 [bagfile2] ...')
    print()
    print('Converts image sequence(s) in ros bag file(s) to video file(s) with fixed frame rate using',VIDEO_CONVERTER_TO_USE)
    print(VIDEO_CONVERTER_TO_USE,'needs to be installed!')
    print()
    print('--fps   Sets FPS value that is passed to',VIDEO_CONVERTER_TO_USE)
    print('        Default is 25.')
    print('-h      Displays this help.')
    print('--ofile (-o) sets output file name.')
    print('        If no output file name (-o) is given the filename \'<prefix><topic>.mp4\' is used and default output codec is h264.')
    print('        Multiple image topics are supported only when -o option is _not_ used.')
    print('        ',VIDEO_CONVERTER_TO_USE,' will guess the format according to given extension.')
    print('        Compressed and raw image messages are supported with mono8 and bgr8/rgb8/bggr8/rggb8 formats.')
    print('--rate  (-r) You may slow down or speed up the video.')
    print('        Default is 1.0, that keeps the original speed.')
    print('-s      Shows each and every image extracted from the rosbag file (cv_bride is needed).')
    print('--topic (-t) Only the images from topic "topic" are used for the video output.')
    print('-v      Verbose messages are displayed.')
    print('--prefix (-p) set a output file name prefix othervise \'bagfile1\' is used (if -o is not set).')
    print('--start Optional start time in seconds.')
    print('--end   Optional end time in seconds.')



class RosVideoWriter():
    def __init__(self, fps=25.0, rate=1.0, topic="", output_filename ="", display= False, verbose = False, start = rospy.Time(0), end = rospy.Time(sys.maxsize)):
        self.opt_topic = topic
        self.opt_out_file = output_filename
        self.opt_verbose = verbose
        self.opt_display_images = display
        self.opt_start = start
        self.opt_end = end
        self.rate = rate
        self.fps = fps
        self.opt_prefix= None
        self.t_first={}
        self.t_file={}
        self.t_video={}
        self.p_avconv = {}

    def parseArgs(self, args):
        opts, opt_files = getopt.getopt(args,"hsvr:o:t:p:",["fps=","rate=","ofile=","topic=","start=","end=","prefix="])
        for opt, arg in opts:
            if opt == '-h':
                print_help()
                sys.exit(0)
            elif opt == '-s':
                self.opt_display_images = True
            elif opt == '-v':
                self.opt_verbose = True
            elif opt in ("--fps"):
                self.fps = float(arg)
            elif opt in ("-r", "--rate"):
                self.rate = float(arg)
            elif opt in ("-o", "--ofile"):
                self.opt_out_file = arg
            elif opt in ("-t", "--topic"):
                self.opt_topic = arg
            elif opt in ("-p", "--prefix"):
                self.opt_prefix = arg
            elif opt in ("--start"):
                self.opt_start = rospy.Time(int(arg))
                if(self.opt_verbose):
                    print("starting at",self.opt_start.to_sec())
            elif opt in ("--end"):
                self.opt_end = rospy.Time(int(arg))
                if(self.opt_verbose):
                    print("ending at",self.opt_end.to_sec())
            else:
                print("opz:", opt,'arg:', arg)

        if (self.fps<=0):
            print("invalid fps", self.fps)
            self.fps = 1

        if (self.rate<=0):
            print("invalid rate", self.rate)
            self.rate = 1

        if(self.opt_verbose):
            print("using ",self.fps," FPS")
        return opt_files


    # filter messages using type or only the opic we whant from the 'topic' argument
    def filter_image_msgs(self, topic, datatype, md5sum, msg_def, header):
        if(datatype=="sensor_msgs/CompressedImage"):
            if (self.opt_topic != "" and self.opt_topic == topic) or self.opt_topic == "":
                print("############# COMPRESSED IMAGE  ######################")
                print(topic,' with datatype:', str(datatype))
                print()
                return True;

        if(datatype=="theora_image_transport/Packet"):
            if (self.opt_topic != "" and self.opt_topic == topic) or self.opt_topic == "":
                print(topic,' with datatype:', str(datatype))
                print('!!! theora is not supported, sorry !!!')
                return False;

        if(datatype=="sensor_msgs/Image"):
            if (self.opt_topic != "" and self.opt_topic == topic) or self.opt_topic == "":
                print("############# UNCOMPRESSED IMAGE ######################")
                print(topic,' with datatype:', str(datatype))
                print()
                return True;

        return False;


    def write_output_video(self, msg, topic, t, video_fmt, pix_fmt = ""):
        # no data in this topic
        if len(msg.data) == 0 :
            return
        # initiate data for this topic
        if not topic in self.t_first :
            self.t_first[topic] = t # timestamp of first image for this topic
            self.t_video[topic] = 0
            self.t_file[topic] = 0
        # if multiple streams of images will start at different times the resulting video files will not be in sync
        # current offset time we are in the bag file
        self.t_file[topic] = (t-self.t_first[topic]).to_sec()
        # fill video file up with images until we reache the current offset from the beginning of the bag file
        while self.t_video[topic] < self.t_file[topic]/self.rate :
            if not topic in self.p_avconv:
                # we have to start a new process for this topic
                if self.opt_verbose :
                    print("Initializing pipe for topic", topic, "at time", t.to_sec())
                if self.opt_out_file=="":
                    out_file = self.opt_prefix + str(topic).replace("/", "_")+".mp4"
                else:
                    out_file = self.opt_out_file

                if self.opt_verbose :
                    print("Using output file ", out_file, " for topic ", topic, ".")

                if video_fmt == MJPEG_VIDEO :
                    cmd = [VIDEO_CONVERTER_TO_USE, '-v', '1', '-stats', '-r',str(self.fps),'-c','mjpeg','-f','mjpeg','-i','-','-an',out_file]
                    self.p_avconv[topic] = subprocess.Popen(cmd, stdin=subprocess.PIPE)
                    if self.opt_verbose :
                        print("Using command line:")
                        print(cmd)
                elif video_fmt == RAWIMAGE_VIDEO :
                    size = str(msg.width)+"x"+str(msg.height)
                    cmd = [VIDEO_CONVERTER_TO_USE, '-v', '1', '-stats','-r',str(self.fps),'-f','rawvideo','-s',size,'-pix_fmt', pix_fmt,'-i','-','-an',out_file]
                    self.p_avconv[topic] = subprocess.Popen(cmd, stdin=subprocess.PIPE)
                    if self.opt_verbose :
                        print("Using command line:")
                        print(cmd)

                else :
                    print("Script error, unknown value for argument video_fmt in function write_output_video.")
                    exit(1)
            # send data to ffmpeg process pipe
            self.p_avconv[topic].stdin.write(msg.data)
            # next frame time
            self.t_video[topic] += 1.0/self.fps

    def addBag(self, filename):
        if self.opt_display_images:
            from cv_bridge import CvBridge, CvBridgeError
            bridge = CvBridge()
            cv_image = []

        if self.opt_verbose :
            print("Bagfile: {}".format(filename))

        if not self.opt_prefix:
            # create the output in the same folder and name as the bag file minu '.bag'
            self.opt_prefix = bagfile[:-4]

        #Go through the bag file
        bag = rosbag.Bag(filename)
        if self.opt_verbose :
            print("Bag opened.")
        # loop over all topics
        for topic, msg, t in bag.read_messages(connection_filter=self.filter_image_msgs, start_time=self.opt_start, end_time=self.opt_end):
            try:
                if msg.format.find("jpeg")!=-1 :
                    if msg.format.find("8")!=-1 and (msg.format.find("rgb")!=-1 or msg.format.find("bgr")!=-1 or msg.format.find("bgra")!=-1 ):
                        if self.opt_display_images:
                            np_arr = np.fromstring(msg.data, np.uint8)
                            cv_image = cv2.imdecode(np_arr, cv2.CV_LOAD_IMAGE_COLOR)
                        self.write_output_video( msg, topic, t, MJPEG_VIDEO )
                    elif msg.format.find("mono8")!=-1 :
                        if self.opt_display_images:
                            np_arr = np.fromstring(msg.data, np.uint8)
                            cv_image = cv2.imdecode(np_arr, cv2.CV_LOAD_IMAGE_COLOR)
                        self.write_output_video( msg, topic, t, MJPEG_VIDEO )
                    elif msg.format.find("16UC1")!=-1 :
                        if self.opt_display_images:
                            np_arr = np.fromstring(msg.data, np.uint16)
                            cv_image = cv2.imdecode(np_arr, cv2.CV_LOAD_IMAGE_COLOR)
                        self.write_output_video( msg, topic, t, MJPEG_VIDEO )
                    else:
                        print('unsupported jpeg format:', msg.format, '.', topic)

            # has no attribute 'format'
            except AttributeError:
                try:
                        pix_fmt=None
                        if msg.encoding.find("mono8")!=-1 or msg.encoding.find("8UC1")!=-1:
                            pix_fmt = "gray"
                            if self.opt_display_images:
                                cv_image = bridge.imgmsg_to_cv2(msg, "bgr8")

                        elif msg.encoding.find("bgra")!=-1 :
                            pix_fmt = "bgra"
                            if self.opt_display_images:
                                cv_image = bridge.imgmsg_to_cv2(msg, "bgr8")

                        elif msg.encoding.find("bgr8")!=-1 :
                            pix_fmt = "bgr24"
                            if self.opt_display_images:
                                cv_image = bridge.imgmsg_to_cv2(msg, "bgr8")
                        elif msg.encoding.find("bggr8")!=-1 :
                            pix_fmt = "bayer_bggr8"
                            if self.opt_display_images:
                                cv_image = bridge.imgmsg_to_cv2(msg, "bayer_bggr8")
                        elif msg.encoding.find("rggb8")!=-1 :
                            pix_fmt = "bayer_rggb8"
                            if self.opt_display_images:
                                cv_image = bridge.imgmsg_to_cv2(msg, "bayer_rggb8")
                        elif msg.encoding.find("rgb8")!=-1 :
                            pix_fmt = "rgb24"
                            if self.opt_display_images:
                                cv_image = bridge.imgmsg_to_cv2(msg, "bgr8")
                        elif msg.encoding.find("16UC1")!=-1 :
                            pix_fmt = "gray16le"
                        else:
                            print('unsupported encoding:', msg.encoding, topic)
                            #exit(1)
                        if pix_fmt:
                            self.write_output_video( msg, topic, t, RAWIMAGE_VIDEO, pix_fmt )

                except AttributeError:
                    # maybe theora packet
                    # theora not supported
                    if self.opt_verbose :
                        print("Could not handle this format. Maybe thoera packet? theora is not supported.")
                    pass
            if self.opt_display_images:
                cv2.imshow(topic, cv_image)
                key=cv2.waitKey(1)
                if key==1048603:
                    exit(1)
        if self.p_avconv == {}:
            print("No image topics found in bag:", filename)
        bag.close()



if __name__ == '__main__':
    #print()
    #print('rosbag2video, by Maximilian Laiacker 2020 and Abel Gabor 2019')
    #print()

    if len(sys.argv) < 2:
        print('Please specify ros bag file(s)!')
        print_help()
        sys.exit(1)
    else :
        videowriter = RosVideoWriter()
        try:
            opt_files = videowriter.parseArgs(sys.argv[1:])
        except getopt.GetoptError:
            print_help()
            sys.exit(2)


    # loop over all files
    for files in range(0,len(opt_files)):
        #First arg is the bag to look at
        bagfile = opt_files[files]
        videowriter.addBag(bagfile)
    print("finished")
저작자표시

'Programming > 기타 etc.' 카테고리의 다른 글

[Git] github -> gitlab / repository를 이사하자  (0) 2021.12.06
[ROS] Rosbag2Video  (0) 2021.11.30
float 값의 비교 (== 연산자는 위험하다!)  (0) 2021.04.13
google drive web client 사용량 제한  (0) 2021.02.25
pycharm 사용 및 환경설정 팁  (0) 2019.03.18
폴더 내의 파일목록을 다뤄보자. 폴더 내 파일 리스트 만들기  (0) 2015.12.17
블로그 이미지

매직블럭

작은 지식들 그리고 기억 한조각

트랙백 0개, 댓글 0개가 달렸습니다

댓글을 달아 주세요

  • «
  • 1
  • ···
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • ···
  • 418
  • »

카테고리

  • 살다보니.. (418)
    • 주절거림 (3)
    • 취미생활 (36)
      • 지식과 지혜 (3)
      • 풍경이 되어 (4)
      • Memories (17)
      • 엥겔지수를 높여라 (2)
    • mathematics (6)
      • Matrix Computation (2)
      • RandomProcesses (3)
    • English.. (8)
    • Programming (138)
      • C, C++, MFC (51)
      • C# (1)
      • OpenCV (17)
      • Python (51)
      • Git, Docker (3)
      • Matlab (4)
      • Windows (3)
      • Kinect V2 (2)
      • 기타 etc. (6)
    • 전공관련 (73)
      • Algorithm (6)
      • Deep Learning (49)
      • 실습 프로그램 (4)
      • 주워들은 용어정리 (8)
      • 기타 etc. (6)
    • Computer (104)
      • Utility (21)
      • Windows (24)
      • Ubuntu, Linux (55)
      • NAS (2)
      • Embedded, Mobile (2)
    • IT, Device (41)
      • 제품 사용기, 개봉기 (14)
      • 스마트 체험단 신청 (27)
    • Wish List (3)
    • TISTORY TIP (5)
    • 미분류. 수정중 (1)

태그목록

  • 칼로리 대폭발
  • Computer Tip
  • review
  • 후쿠오카
  • LIBSVM
  • DSLR
  • DeepLearning
  • 매트랩 함수
  • random variable
  • CStdioFile
  • Convolutional Neural Networks
  • Deep Learning
  • matlab function
  • 큐슈
  • ReadString
  • 딥러닝
  • ColorMeRad
  • matlab
  • 매트랩
  • 오봉자싸롱
  • 일본
  • function
  • 갤럭시노트3
  • utility
  • portugal
  • 스마트체험단
  • 포르투갈
  • 크롬
  • SVM
  • 에누리닷컴

달력

«   2022/08   »
일 월 화 수 목 금 토
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31      
08-14 11:40

LATEST FROM OUR BLOG

  • windows terminal(powershell⋯.
  • vscode terminal 에 conda를⋯.
  • vscode에 conda 가상환경을⋯.
  • vscode keymap을 변경하자.
  • 골뱅이 연산자의 의미 (행렬곱)..
  • 프린터 용지 부족 문제를 해⋯.
  • [MXNet] 데이터 리스트를 만⋯.
  • 예쁘게 출력하자 pprint - pr⋯.
  • 작업표시줄 미리보기를 리스⋯.
  • 이미지 실제 파일 포맷 확인하기.
RSS 구독하기

BLOG VISITORS

  • Total : 1,149,447
  • Today : 36
  • Yesterday : 164

Copyright © 2015 Socialdev. All Rights Reserved.

티스토리툴바